Whisks and blending attachments

1. Insert the whisks or blending attachments in the housing until they snap into place (drawing 1). When fastening the attachments, observe the marking on the mixer.

2. Plug the mixer into a power outlet.

3. Place products for blending/whip­ping in the appropriate container.

4. Lower the attachments into the mixing container and turn on the mixer by turning the switch to the right (drawing 2).

5. Set the desired speed (positions 1 - 5) - (drawing 2).

6. For turning on the "Turbo"-mode put the switch "A" to the left end position ("Blender"-mark) and push the "Turbo"-button (C).

7. After you are finished, set the speed control to "0" position.

8. Unplug the mixer.

9. To release the attachments, press on the attachment fixation button (drawing 4).

Blender

1.Fasten the blender attachment to the housing by turning it clockwise (drawing 5).

2.The mixing container must be not more than 2/3 full to prevent splashing. The height of the mix­ing container must be about 18 cm and the diameter must be about 11 cm.

3.The contents of the container must at least cover the main blender attachment.

4. Do not submerge or remove the blender from the mixing container while the motor is switched on.

5.For starting the operation put the switch "A" to the left end position ("Blender"-mark) and push the "Turbo"-button (C).

6.For your safety, the mixer has a sensor that prevents it from being used if the blender attachments are not fastened.

7.Hold the turbo mode button during use. The mixer will turn off when you release the turbo mode but­ton.

ATTENTION:

1. Turn off the mixer after every 5 minutes of uninterrupted use.

2. Do not allow the mixer to remain working for more than 10 min at a time.

3. While using the blender, do not turn it on for more than 5 minutes. After use, submerge the attach­ment (but not the blender itself!) in water or other liquid.

Before removing the blender attachment from the housing, make sure that the speed control switch is in the "0" position.

RECOMMENDATIONS FOR CHOOSING THE OPTIMAL WORK MODES

SPEED DESCRIPTION

1. Optimal starting speed for blend­ing dry and granular products such as flour, oil and potato

2. Optimal starting speed for blend­ing liquids and salad dressings

3. Optimal speed for making cake batter and cookie dough

4. Optimal speed for whipping cream, making desserts, etc.

5. Optimal speed for beating eggs or cream, making sugar icing, potato puree, etc.

TURBO. See speed 5

CARE AND STORAGE

• Unplug the mixer from the power outlet. Wash the attachments and wipe them dry.

• Wipe the housing of the motor with a damp cloth.

• Use mild dish soap to clean the mixer. Do not use metal brushes or abrasives.

• Do not submerge the housing of the mixer in water!

Specifications

Power supply: 230 V ~ 50 Hz;
Power: 300 W

The manufacturer shall reserve the right to change the specification of the appliances without preliminary notice.

The life time of the appliance shall not be less than 3 years

Guarantee

Details regarding guarantee condi­tions can be obtained from the dealer from whom the appliance was pur­chased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

This product conforms to the EMC-Requirements as laid down by the Council Directive 89/836/EEC and to the Low Voltage Regulation (73/23 EEC)

ІІІ THE SPEAKERS

Thank you for purchasing this Edifier product. For generations, Edifier tries to provide powered speaker products to satisfy the need of our end customers, even the most demanding ones. This product can add to your home entertainment, personal computer, and mini home theater great sound performance. Please read this manual carefully to obtain the best of this system.

The lightning flash with arrowhead inside the triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the product's enclosure that may be of a sufficient magnitude to constitute a risk of electric shock to persons.

To prevent the risk of electric shock, do not remove cover (or back).No user-serviceable Parts inside. Refer evicting to qualified Service personnel only.

The exclamation point inside the triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

SAFETY INSTRUCTIONS

Please read all the instructions herein. Please retain this manual safely for future reference.

Please heed all safety warnings. Please install in accordance with the manufacturer's instructions,

Please adjust the volume control to a comfortable level to avoid damaging your hearing and the system.

• Do not expose this apparatus to rain or moisture,

• Do not use the speakers near water, and do not immerse them in any liquid or pour any liquid on them.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• For added protection during lightning storms, unplug the speakers from the electrical outlet and turn off the computer.

• Unplug this apparatus when unused for long periods of time.

• Place the speakers away from all heat sources, such as heaters, stoves, and direct sunlight.

• Do not block the openings in the speaker cabinets. Never push objects into speaker vents or slots.

• Prevent risk of fire or electric shock hazards, and provide sufficient space around the speakers for proper ventilation.

• Place the speakers in a stable location so that it will not fall causing damage to the speakers or bodily harm.

• Unplug the speakers from the computer and from the electrical outlet before cleaning them with a damp cloth.

Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Refer all servicing to qualified service personnel only.