List and describe the content of the sections of production schedules.

The main point of reference for the making of an industrial enterprise project is a design task, in which the following information should be specified:

- Company name;

-The basis for the design area, point and area of ​​construction;

-Product range and production capacity

-The intended operation and specialization of the enterprise;

-The main sources of water, heat, gas and electricity;

-The conditions for the treatment and discharge of waste water;

-The main technological processes and equipment;

-Expected development (expansion) of enterprises;

-The planned timing of construction;

-The size of the planned investments;

-Data for the design of housing projects, the design stage;

-The name of the general design organization;

-The name of the construction company of the general contractor.

Design of industrial enterprises, according to the instructions can be carried out in two stages: the development of the project design and development of working drawings or in one - a technical project with working drawings.

Technical project should determine the economic feasibility of the plant construction in this place and in timing, as well as to solve the production and construction issues of the raw material, materials, energy, water and other resources, building materials, structures and products; define processing, providing high productivity; organization and production management system, the need for personnel.

The technical project includes the following parts:

· Executive Summary (short summary of the content of the project)

· The technical and economic part (basic data and the results of technical and economic calculations of the effectiveness and feasibility of construction enterprises)

· General plan and transport (includes justification of planning decisions, traffic flows and the choice of types of transport, protection of enterprise)

· Technological part with the section "process automation" (Process procedure consists of several sections: production technology, process automation, power supply and electrical equipment, heat networks)

· Organization of work and production management systems (organization of work processes, the development of the management structure, communication and alarm)

· Construction part (general information about the project, information about the area and volume, heating, ventilation, water supply and sewerage)

· Organization of construction

· Estimates and graphical part

 

Select a 10-point rules of the laboratory and analytical work according to the rules of industrial safety in the mining of ore field methods situ and heap leaching. Spend on the items inspection process tests your analytical room.

In a laboratory building and premises necessarily natural lighting shall be provided, heating, water supply and sewerage, drainage and cleaning of washing water.

Rooms are designed to work with hazardous substances must be isolated from the rest of the lab, have a separate entrance and hoods, non-ventilation of other spaces.

Switch the air handling unit must be located in front of the room and interlocked light and sound alarms, warning about turning off ventilation, and must also provide for automatic activation of emergency ventilation in case of failure the main air handling unit.

Ventilation devices in laboratory rooms where work with chemically aggressive substances should be made from chemically resistant materials or be protected against corrosion.

Gas and water taps on the desktops and in closets shall be located at their front sides (edges) and mounted so as to prevent accidental opening of the valve.

To wash a large number of chemical vessels must be equipped with separate washing facilities, which must be located in the center of the laboratories they serve. Washing must be equipped with special tables:

1) one with a fume hood to remove noxious odors;

2) two outdoor washing soda solution and clean water.

Glass bottles with acids and alkalis must be stored in strong wooden crates. The space between the bottle and crate must be filled with packing material, pre-impregnated with flame retardant.

Alkali metals should be stored in the dehydrated oils, kerosene or without air, into a thick, well-sealed container. Bottles with alkali metals should be placed in a metal box with a tight lid, sides and bottom of which are lined with asbestos.

On each vessel with a chemical substance to be a sticker, which shall be specified name of the product and other data in accordance with the Standard. Do not store chemicals in laboratories without labels on the container, appropriate to their nature.

Hazardous substances must be stored in a special room in a metal closet under lock and seal. Containers for the storage of these substances must be sealed.

In the laboratory, in prominent places must be posted safety instructions.

At every workplace and in the warehouse, you must have a sufficient amount of neutralizing agents.

Each operating room laboratory in a conspicuous place readily accessible should be a first aid kit that contains the necessary medicines for first aid.

21. Define the following terms:

The technical condition of the well - the state of the well design elements, its performance, temporary and permanent defects caused during the operation;

Mudding filter and pre-filtered well zone - the process of reducing the filtration capacity of the filter and filtration properties pre-filtered productive zone of the aquifer as a result of plugging Holes, channels and pores mechanical and chemical precipitation;

Decolmatation filter and pre-filtered well zone - the elimination of the consequences of mudding process;

Septic tanks - surface or recessed volume facilities for the collection of technological solutions and the deposition of suspended solids;

Processing complex in-situ and heap leaching - a complex of technical means and facilities, providing processing of productive solutions to obtain the final product;

The authorized body in the field of industrial safety - a central executive body of the Republic of Kazakhstan, carrying out within the limits of the powers of state policy in the field of industrial safety;

Select a 10-point rule requirements for laboratory buildings, premises and workplaces according to the rules of industrial safety in the mining of ore field methods situ and heap leaching. Spend on the items inspection of the premises of your analytical room.

In a laboratory building and premises necessarily natural lighting shall be provided, heating, water supply and sewerage, drainage and cleaning of washing water.

Rooms are designed to work with hazardous substances must be isolated from the rest of the lab, have a separate entrance and hoods, non-ventilation of other spaces.

Switch the air handling unit must be located in front of the room and interlocked light and sound alarms, warning about turning off ventilation, and must also provide for automatic activation of emergency ventilation in case of failure the main air handling unit.

Ventilation devices in laboratory rooms where work with chemically aggressive substances should be made from chemically resistant materials or be protected against corrosion.

Gas and water taps on the desktops and in closets shall be located at their front sides (edges) and mounted so as to prevent accidental opening of the valve.

To wash a large number of chemical vessels must be equipped with separate washing facilities, which must be located in the center of the laboratories they serve. Washing must be equipped with special tables:

1) one with a fume hood to remove noxious odors;

2) two outdoor washing soda solution and clean water.

Glass bottles with acids and alkalis must be stored in strong wooden crates. The space between the bottle and crate must be filled with packing material, pre-impregnated with flame retardant.

Alkali metals should be stored in the dehydrated oils, kerosene or without air, into a thick, well-sealed container. Bottles with alkali metals should be placed in a metal box with a tight lid, sides and bottom of which are lined with asbestos.

On each vessel with a chemical substance to be a sticker, which shall be specified name of the product and other data in accordance with the Standard. Do not store chemicals in laboratories without labels on the container, appropriate to their nature.

Hazardous substances must be stored in a special room in a metal closet under lock and seal. Containers for the storage of these substances must be sealed.

In the laboratory, in prominent places must be posted safety instructions.

At every workplace and in the warehouse, you must have a sufficient amount of neutralizing agents.

Each operating room laboratory in a conspicuous place readily accessible should be a first aid kit that contains the necessary medicines for first aid.